China Output Shaft 30mm Kpc03 Foot Mounted Transmission Gear Helical Gearbox helical angle gearbox

Merchandise Description

Solution Description

KPC Sequence helical gearbox is a new era product which designed basing on the modular program, It can be linked respectively with motors such as IEC normal motor, brake motor, explosion-proof motor, frequency motor, servo motor and so on. it has 4 types(),electrical power from .12kw to 4.0kw, ratio from 3.sixty six to fifty eight.09, Max torque from 120Nm to 500Nm.It can be join discretionary(foot or flange) and use multi-mounting positions appropriately. This product is widely employed in textile, foodstuff, beverage,tobacco, logistics industrial fields,and many others.

        Solution Attributes

  1. Modular building
  2. Large performance
  3. Exact grinding, lower sound
  4. Compact structural design and style
  5. Univeral mounting
  6. Aluminium housing, light-weight in fat
  7. Carbonize and grinding hardened gears, tough
  8. Multi-composition, can be merged in various varieties to meet up with various transmission problem

       Set up:
      1.Foot mounted
      2.Output Flange mounted
      3.B14 Flange mounted

      Models:
      1.KPC..P(Foot-mounted): KPC01P,KPC02P,KPC03P,KPC04P
      2.KPCF..P(Output Flange-mounted): KPCF01P,KPCF02P,KPCF03P,KPCF04P
      3.KPCZ..P(B14 Flange-mounted): KPCZ01P,KPCZ02P,KPCZ03P,KPCZ04P

Thorough Photos

Merchandise Parameters

KPC03..       n1=1400r/min         300Nm
n2 M2max Fr2 i Proportion 71B5/B14 80B5/B14 90B5/B14 100B5/B14 112B5/B14
[r/min] [Nm] [N]
24 three hundred 6000 58.09  639/eleven          
28 three hundred 6000 50.02  2201/44          
32 three hundred 6000 43.75  4331/99          
36 300 6000 38.73  426/eleven          
40 300 5860 34.62  4189/121          
forty nine three hundred 5480 28.30  4047/143          
64 280 5571 21.78  1917/88          
81 280 4660 seventeen.33  3621/209          
ninety three 260 4440 fifteen.06  497/33          
113 260 4160 twelve.37  1633/132          
136 240 3910 ten.28  3053/297          
177 180 3590 seven.93  1269/160          
222 a hundred and eighty 3320 6.31  2397/380          
255 150 3170 5.48  329/60          
311 one hundred fifty 2970 4.50  1081/240          
374 150 2790 three.74  2571/540          

Outline Dimension:

Firm Profile

About our organization:
We are a professional reducer producer located in HangZhou, ZHangZhoug province.Our leading goods is  full variety of RV571-a hundred and fifty worm reducers , also equipped hypoid helical gearbox, Pc units, UDL Variators and AC Motors.Goods are widely used for purposes this sort of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-producing, construction machinery, metallurgic mine, environmental protection engineering, and all varieties of automated strains, and assembly traces.With quick delivery, excellent soon after-product sales support, sophisticated making facility, our products sell well  both at home and abroad. We have exported our reducers to Southeast Asia, Eastern Europe and Center East and so on.Our purpose is to produce and innovate on basis of substantial quality, and produce a good track record for reducers.

Packing data:Plastic Bags+Cartons+Wood Cases , or on request
We participate Germany Hannver Exhibition-ZheJiang PTC Fair-Turkey Earn Eurasia

Logistics

We can dispatch products by sea, by teach, by air according to consumer instruction

Soon after Income Provider

one.Upkeep Time and Warranty:Within 1 yr after receiving goods.
two.Other ProviderWhich includes modeling variety guide, set up guidebook, and difficulty resolution manual, etc.

FAQ

one.Q:Can you make as for each client drawing?
A: Sure, we provide personalized support for consumers appropriately. We can use customer’s nameplate for gearboxes.

two.Q:What is your terms of payment ?
   A: thirty% deposit before generation,equilibrium T/T ahead of supply.

three.Q:Are you a trading business or manufacturer?
   A:We are a manufacurer with sophisticated tools and knowledgeable workers.

4.Q:What is your generation ability?
   A:8000-9000 PCS/Month

5.Q:Free of charge sample is obtainable or not?
   A:Sure, we can provide free of charge sample if customer agree to pay for the courier value

6.Q:Do you have any certification?
   A:Yes, we have CE certification and SGS certification report.

Get in touch with info:
Ms Lingel Pan
For any inquiries just really feel free of charge ton get in touch with me. Several many thanks for your kind attention to our firm!

US $65-75
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Function: Distribution Power, Change Drive Torque, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 65/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

KPC03..       n1=1400r/min         300Nm
n2 M2max Fr2 i Proportion 71B5/B14 80B5/B14 90B5/B14 100B5/B14 112B5/B14
[r/min] [Nm] [N]
24 300 6000 58.09  639/11          
28 300 6000 50.02  2201/44          
32 300 6000 43.75  4331/99          
36 300 6000 38.73  426/11          
40 300 5860 34.62  4189/121          
49 300 5480 28.30  4047/143          
64 280 5020 21.78  1917/88          
81 280 4660 17.33  3621/209          
93 260 4440 15.06  497/33          
113 260 4160 12.37  1633/132          
136 240 3910 10.28  3053/297          
177 180 3590 7.93  1269/160          
222 180 3320 6.31  2397/380          
255 150 3170 5.48  329/60          
311 150 2970 4.50  1081/240          
374 150 2790 3.74  2021/540          
US $65-75
/ Piece
|
1 Piece

(Min. Order)

###

Application: Motor, Machinery, Marine, Agricultural Machinery, Industry
Function: Distribution Power, Change Drive Torque, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Double-Step

###

Samples:
US$ 65/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

KPC03..       n1=1400r/min         300Nm
n2 M2max Fr2 i Proportion 71B5/B14 80B5/B14 90B5/B14 100B5/B14 112B5/B14
[r/min] [Nm] [N]
24 300 6000 58.09  639/11          
28 300 6000 50.02  2201/44          
32 300 6000 43.75  4331/99          
36 300 6000 38.73  426/11          
40 300 5860 34.62  4189/121          
49 300 5480 28.30  4047/143          
64 280 5020 21.78  1917/88          
81 280 4660 17.33  3621/209          
93 260 4440 15.06  497/33          
113 260 4160 12.37  1633/132          
136 240 3910 10.28  3053/297          
177 180 3590 7.93  1269/160          
222 180 3320 6.31  2397/380          
255 150 3170 5.48  329/60          
311 150 2970 4.50  1081/240          
374 150 2790 3.74  2021/540          

Helical Gearbox

Depending on the helical gearbox, it can be either Crossed-axis or Inline. Basically, helical gearboxes are composed of a set of toothed gears that mesh with other toothed parts to transmit torque and speed to other parts of the machine.helical gearbox

Right angle helical gearboxes

Choosing the right angle gearbox can be difficult. This is because the design and specifications will depend on the type of application. The right gearbox can make or break the efficiency of the system. For example, a right angle gearbox will need to be corrosion resistant if it is used in a washdown application. It may also require special grease for use in cold temperatures.
There are many different types of right angle gearboxes. The types include worm, hypoid, and spiral bevel gearboxes. The most common are worm gearboxes. These are a great option for applications that need high torque and power. However, they are not as efficient as spur gears.
Helical gearboxes are ideal for heavy-duty industrial applications such as conveyors, blowers, and elevators. They are quiet and have better speed capabilities than spur gears. They can handle larger loads because of their gradual engagement. They are also capable of adjusting the rotation angle by 90 degrees. They are also more efficient at high speeds.
Spiral bevel gearboxes require more precision to manufacture. They are also more expensive to produce. This is because the teeth need to be drilled and shaped to fit the shafts. The gearbox needs to be designed with tight tolerances and requires basic lubrication. Its operating cycle is long.
Helical gearboxes can be used in conjunction with other gearboxes. For example, the output shaft may be a hollow shaft, or it may be designed with dual counter-rotating shafts. They can also be designed to operate in either a clockwise or counter-clockwise direction.
Right angle gearboxes are ideal for high-speed applications. They require less maintenance than other industrial components. They may require corrosion resistant plating or stainless steel shafts. If you are considering a right angle gearbox, check with a distributor to see what types of products are available. A representative will be able to help you with installation. They may also offer custom gearbox solutions to fit your needs.
A gearbox is made up of four main components. These components include the input shaft, the output shaft, the gear, and the backlash.

Crossed-axis helical gears

Normally, helical gearboxes are used to increase torque between two rotating shafts. Compared to other types of gearboxes, helical gearboxes offer greater speed and power carrying capacity. They are also quieter and smoother in operation. These gearboxes are used in many industries such as food processing, plastic, rubber, and oil industries. These gears also have the advantage of being cheaper than spur gears.
These gears are designed with special teeth that are positioned at an angle to the face of the gear. As they rotate, the teeth engage gradually. They have longer teeth, which allow them to carry heavy loads. The contact area also increases as the gears rotate.
A cross axis helical gearbox is one of the most common types of gearboxes. This gearbox has an advantage over spur gears, since it uses bearings to support the thrust load. It can also adjust the rotation angle by 90 degrees. These gearboxes are typically used to drive automobile oil pump/distribution shafts. They are also used to drive blowers. They have a large thrust force.
The cross axis helical gearbox has the advantage of using bearings to support the thrust load. However, it also has the disadvantage of using a large amount of bearings. In addition, these gears are not suitable for speed reduction beyond 1:2.
Thermoplastic crossed axis helical gears are a convenient solution for high volume applications. These gears are self-locking and offer high torque. These gears are also very durable. They are also available in a variety of configurations and sizes. They are used in a wide range of industries, including the textile industry. The output torque of these gears is also very high.
Crossed helical gears are also used to transmit motion and power between perpendicular but non-intersecting shafts. To achieve this, two mating helical gears must have the same helix angle, pressure angle, and normal pitch. They should also be mounted on perpendicular but non-intersecting, parallel shafts.
To calculate the real radial pitch of a gear, the angle of cut is measured. The gear teeth are then cut at an angle to the face of the gear. The helix angle is also measured.helical gearbox

Inline helical gears

Unlike spur gears, helical gears have a large surface contact and are characterized by low noise and large torque. Moreover, helical gears also have a high degree of meshing performance. They are also compact and durable.
As the name suggests, helical gears are produced using hard steel teeth. They are also hobbed to ensure smooth running and accurate surface finish. In addition, all gearing is ground for increased efficiency.
Inline helical gearboxes are used in a number of applications, including waste water systems and in solvent extraction. They are also used in industries like power plants and food & tobacco. They have good efficiency and are low in cost. They also have interchangeability and high durability. They can be installed in a single piece aluminum alloy housing. They can also be foot mounted or flange mounted. They are available in single stage and three stage constructions.
Helical gearboxes are typically used in high-load applications, such as in cement and waste water systems. They are also suitable for industrial applications, including in manufacturing. They are also used in applications where there is a large speed variation range. They are suitable for a wide temperature range, from -10 degC to 40 degC.
A helical gearbox has a high degree of interchangeability, and can be installed with a wide range of motors. They are also available in flame proof versions. They can also be supplied with an integrated output flange. They have standard IEC inputs, making them easy to install and operate. They also have a removable inspection cover, which allows periodic inspection of gearing. They can also be supplied with integral mounting bases.
The transmission ratio of helical gearboxes is finely graded to meet different working conditions. They also have an output torque that ranges from 1.4-250. They are also available in a modular model, which allows them to be produced in an economical manner. They can also be installed with a standard IEC input, which makes them easy to fit with any IEC motor. They also have a permanent nameplate, which indicates the ratio and the output torque.helical gearbox

Helix angle

Using a helical gearbox is a more economical and efficient way of creating a gearbox. It is also beneficial for production because it allows for more interchangeable components. It can also be used in the oil and plastic industries. It has advantages over conventional gears because it runs quieter.
The helical gearbox is a type of gearbox that uses a helical cut on the teeth of the gears. It carries more surface contact than conventional gears, which increases the power carrying capacity. It is also more durable and quieter than conventional gears.
The helical gearbox is generally used in enclosed gear systems because it allows for higher tooth overlap and smoother performance. It also eliminates thrust forces. The helical gearbox can be made of two helical sections that are close together. It is common to use double helical gearboxes in enclosed gear systems. The gears can be ground and hardened.
The radial pitch of helical gears is about eight millimeters. In the helical gearbox, the radial pitch of the gears is the same as the pitch of the spur gears. Using the same tooth cutting tools, it is possible to make helical gears more economically.
The pitch of the helical gearbox will vary with the helix angle. Typically, the helix angle is between 15 and 30 degrees. The pitch will also change with the number of teeth in the spur gear. The pitch will increase when the number of teeth increases.
The pitch is also affected by the pressure angle of the tooth. The pressure angle affects the normal force and curvature radii. The length of the helical gear contact line decreases as the pressure angle increases. This can also be seen when considering contact on the tooth surface. The helix angle is also important when calculating the forces between the helical gears.
It is important to understand that helical gears generate axial forces within the gear-mesh. These forces need to be supported by bearings. They also generate heat. This heat is also detrimental to the efficiency of the gear. It can also cause power loss.
China Output Shaft 30mm Kpc03 Foot Mounted Transmission Gear Helical Gearbox     helical angle gearboxChina Output Shaft 30mm Kpc03 Foot Mounted Transmission Gear Helical Gearbox     helical angle gearbox
editor by czh 2023-01-02